WHEEL CLEAN & SEAL KIT Description
Everything you need to clean and maintain your wheels keeping them looking factory fresh looking !
- 500ml Very Cherry Non Acidic Wheel Cleaning
- 500ml Citrus Wash APC
- 500ml Tyre Gloss - Ultimate High Gloss Tyre Dressing
- 500ml Just The Tonic Tar Remover
- 500ml Purple Rain 3.0 Fallout Remover
- 30g Sample Size Ceramic Wheel Wax
- 1 x AD Waffle Tyre Applicator
- 1 x Red AD Foam Applicator
- 2x 40 x 40 Microfibre towels Colours of towels may vary depending on stock
- DBS Brush Set
This kit contains all the products you will need to effectively clean, decontaminate, protect your wheels and dress your tyres!
Citrus Wash APC 500ml RRP £8.00
Citrus Wash is a powerful yet gentle pre-wash/all- purpose cleaner/car shampoo that rapidly breaks down dirt and grime upon contact and leaves vehicles looking fresh. This car shampoo has a scent as strong as it’s cleaning power and will leave a bright and fragrant citrusy fragrance and a sparkling shine.
It has a blend of deep cleaning detergents infused with Citrus Oil to give fast-acting cleaning, removing the toughest of grime with ease! Citrus Wash is also ideal for removing road grime, bug splatter, moss and mildew from all painted, plastic, vinyl and rubber surfaces. Safe to use and very effective, and leaves a streak- free finish.
Wheel & Tyre Cleaner 500ml RRP £10.00
Very cherry professional Strength Acid Free wheel cleaner contains a powerful blend of degreasers and cleaners to clean your wheels. A very effective, deep cleaning and high foaming cleaning agent that provides superb performance against even the worst dirt and grime on your wheels and tyres. Ideal to use on all modern painted & clear coated wheel finishes.
In a lot of cases VCNA can be applied to the alloy wheel and then rinsed under pressure with no agitation needed, the power of this product makes light work of cleaning your alloy wheels even with the most stubborn brake dust, grime and dirt. In some cases, we recommend you apply to the alloy wheel and leave for a couple of minutes to penetrate into the dirt before agitating with your favourite wheel brushes.
Purple Rain V3.0 Fallout Remover 500ml RRP £12.00
Just The Tonic Tar & Glue remover is an excellent, fast acting solvent-based product that quickly dissolves tar upon contact. Removing even the most stubborn, heavy deposits of tar from the car with ease. Its fast acting formula works so well on contact the tar simply dissolves before your eyes. Just The Tonic is also effective at removing transport wax, glue residue from stickers from windows and not many people know this but if you have an ink or oil stain on your carpet in your car, Just The Tonic will remove them with ease! Just The Tonic will even break down and remove chewing gum from carpets and interiors, a top tip there from AD!
Classy Tyre Dressing 500ml RRP £12.00
Tyre Gloss is a cherry scented, gloss dressing for tyres that leaves a glorious shine to all rubber surfaces. You can control the look of your tyres by product application, apply a little for a satin finish, apply more for a high gloss finish. It leaves a stunning finish to your tyres and is water resistant too!
Blendz Ceramic Wheel Wax ( Sample) RRP £20.00
BLENDZ Ceramic Wheel Wax is easy to apply and remove, offering incredible hydrophobic behaviour, chemical and dirt resistance and high temperature resistance thanks to a blend of fluorinated polymer additives.
Ceramic Wheel Wax perfect all alloy wheel surfaces including gloss, diamond cut, matte/satin & powder coated finishes. It is the ultimate easy to use wheel sealant, and makes future wheel cleaning a breeze!
Our sample pot contains enough product for at least 4 complete applications.
DBS Brush set RRP £15.00
Our redesigned DBS general purpose detailing brush set is perfectly suited for your daily cleaning duties. Using 70/30 natural and synthetic bristles for a more intensive clean. Theses brushes use zero metal components meaning no sharp edges and the textured grip makes handling easier and more precise.
The set contains 1 x 16cm brush which is perfect for exterior use on areas such as wheels, grilles and also interior areas such as dashboards, air vents, and centre consoles and 1 x 24cm brush ideally suited for engine bay cleaning, door shuts and fuel filler cap areas. The plastic body and combination natural and synthetic bristle design allows for both wet and dry use without fear of swelling or cracking as with traditional wooden handled brushes.
Work Towels x 2 RRP £3.00
General purpose cleaning towels which are perfect for general cleaning tasks and removing wheel wax.
Red Wax Applicator x 1 RRP £1.50
Red Wax applicator – perfect to apply your Ceramic Wheel Wax
Waffle Applicator RRP £5.00
Waffle applicator which is suited to apply all tyre dressings.
How to use
Very Cherry Non Acid – Wheel Cleaner
One wheel at a time, apply Very Cherry Non Acid to the wheel and tyre completely soaking the wheel with product. Allow the product to dwell for a couple of minutes, this will soften the dirt & grime and start to pull of in a dirty, black residue. With your DBS brushes, agitate the wheel and tyre and work into a foam ensuring all areas are cleaned. Then take your EZ Wheel Brush and agitate the back rims of the wheel again ensuring all areas including behind spokes/faces and between calipers are totally cleaned. When your wheel is cleaned thoroughly pressure rinse the wheel and tyre.
Citrus Wash – APC
Pre-spray Citrus Wash to the soiled areas on your wheels and tyres, leave to dwell for a few minutes, agitate with a soft brush then pressure washer rinse. This will soften the dirt and grime and remove easily when rinsed.
Purple Rain – Fallout Remover
When your wheels are clean and free from dirt and dry, apply Purple Rain 3 liberally to the surface, make sure the surface is cool before application. When Purple Rain 3 is applied on the surface the product starts to react with the contaminants immediately, This procedure will last approx 3-4 minutes (do not let the product completely dry out), then the purple/red colour will start to fade, at this point its time to remove the excess residue from the surface by rinsing or you can agitate the surface with our DBS brush set and EZ brush to remove stubborn contamination from alloy wheels or a standard microfibre towel from the paintwork. Thoroughly pressure rinse the entire surface when the clean is completed.
Removing Tar – Just The Tonic Tar Remover.
Spray JTT on the affected areas on your wheels, this will dissolve the tar upon contact. Depending on the level tar on the surface you may need 1 or 2 applications to completely remove the tar deposits.
Sealing your wheels
Apply Blendz Wheel Sealant to a dry, clean wheel. Apply Blendz liberally to the spokes, wheel faces and back rims, completely cover all exposed metal surface with a our Blendz Wax applicator. Leave to cure for approx 30 minutes per wheel.When cured, simply buff off the wheel sealant making sure the sealant has been completely removed from all areas, repeat this process after an hour has passed for even more awesome gloss and protection. We always recommend 2 coats of Blendz wheel sealant per wheel for the best protection.
Tyre Gloss – Tyre Dressing
When using Autobrite Tyre gloss you want the best finish possible on your tyres, below is a few recommend applications by us to give you the best possible finish and without dreaded ‘product sling’ that some folk seem to struggle with.
Ensure the tyre is clean and completely dry before application, spray approx 2-3 sprays of Tyre gloss to our waffle applicator. Work the product into the wall of the tyre ensuring all of the surface is completely covered. This will give you a satin like finish. If you wanted a higher gloss finish on your tyres, leave the first coat to dry approx 10 minutes then apply a few more sprays to the waffle applicator and completely cover the tyre again ensuring you work all the dressing into the markings and letters of the tyre wall surface. Leave to dry and will have a lovely, rich gloss to your tyres that also gives you that durable finish.
Another traditional method of application is applying the product straight to the tyre wall by spraying Tyre gloss and completely covering all of the surface. This method my become a little messy as product may start to run down the wheel and tyre, quickly pick up your waffle applicator and wipe the tyre spreading the product around and then you can again control the look of your tyre from a satin to a high gloss finish.
Tyre gloss can also be applied by again spraying Tyre gloss onto the surface completely covering the tyre. Then you can always use one of our DBS brush to wipe and work the product into the tyre until you get the desired effect. However you must approach this with caution, excess product on the tyre may cause excess product to sit within the markings of the tyre and will cause ‘product sling’. Be sure to work the product into the tyre wall to avoid this.
Up to 1kg £3.50
Up to 30kg £4.50
Scottish Highlands & Islands
Up to 1kg £3.50
Up to 30kg £9.00
A shipping quote can be obtained during the checkout process on our website.
Spend and earn points
Shop now, pay later. Learn More
Out of stock
Out of Stock - £80.00