MICROFIBRE WAX & SEALANT APPLICATOR

Name: MICROFIBRE WAX &amp; SEALANT APPLICATOR
SKU: CERAMICSHIELDAPPLICATOR
Price: 4.00 GBP
Availability: InStock
Rating: 5.00 (1 reviews)

STEP 5 - PROTECT

Perfect to use with our Ceramic Shield

In Stock

Premium grade microfibre applicator which sits perfectly with our Ceramic Ultra Spray Wax in the Ceramic Shield family.

Features

Perfect for Ceramic Shield Ultra Spray Wax
Fits snuggly into the palm of the hand
Premium grade soft microfibre
Deliver the best results every time with the Ultra Spray Wax

Description

Microfibre Wax & Sealant Applicator

Premium grade microfibre wax applicator. Ideal to be used with our Ceramic Ultra Spray Wax but it can also be used to apply other AD polishes waxes, sealants, and dressings.

The soft microfibre fabric covers the foam pad and delivers just the right amount of product evenly to the surface without saturating the sponge or wasting the product. With the right amount of pressure and completely flat to the surface, our Ceramic Shield microfibre applicators deliver the best results every time!

Care Instructions

Pre-soak the Ceramic Shield applicators in our Clean Towels microfibre cleaner with warm water and clean as required, do not wash them in the washing machine, this can cause potential misshaping of the product. If there is heavy soiling, use a padded brush to assist in cleaning. If you have used these with a silicone-based product, apply our Just The Tonic tar & glue remover to break the silicone down, then wash them in the normal way as above. When clean, leave them to air dry naturally.

How to use

Usage instructions

Prime the Ultra Spray Wax Microfibre Applicator with one spray of Ceramic Ultra Hybrid Wax to moisten. On a clean, dry surface, apply one small mist directly to the surface, and spread in a criss-cross pattern over an area no larger than three feet square. Spread until product begins to haze and an even coverage is achieved (approx. 10-20 seconds). Use sparingly – less is more!

Buff off excess using a short pile microfibre towel using consistent pressure, turning the towel frequently.

Alternatively, for a quick and easy application over existing protection, apply one mist to a short pile microfibre towel, spread evenly in a criss-cross pattern, and buff off excess using a second towel.

Allow at least one hour to cure between layers. Allow to cure for 2 hours before exposing to moisture for best results. Full cure time is achieved after one week.

4319 in stock