FINAL FINISH POLISH Description
Anti Hologram abrasive finishing polish, offering permanent removal of holograms, polishing haze, fine scratches, marring and up to 3000 grit sanding marks
- Cut 2/10 - Gloss 10/10
- Perfect for removing holograms and fine swirls
- Forgiving, easy to use diminishing formula with extended working time capabilities
- Removes 3000 grit sanding marks
- Quality high gloss & flawless finish.
- Suitable for Rotary Polisher and DA
- Silicone free
Final Finish is a super fine Anti Hologram abrasive finishing polish, offering permanent removal of holograms, polishing haze, fine scratches, marring and up to 3000 grit sanding marks on all paint types (including scratch resistant coating systems). Final Finish is a highly specialised, homogeneous abrasive product and can be used with ease on all paint surfaces, offering a brilliant gloss finish every time!
The NEW Autobrite Direct “Correct-it” range has been designed specifically for use on modern ceramic and scratch-resistant clear coats, they have also proven themselves to be ideal for use on harder (German) clear coats in situations where maximum levels of paint correction are required to correct paint defects. Easily identified colour coded pads and compounds make paint correction a piece of cake. Our black foam Correct-It pad is recommended .
Aimed at professional detailers and enthusiasts, these products offer significant advantages in terms of finish quality and work time compared to competitors. Each Product offers fully detailed, easy to understand instructions, cut and gloss scale – thus ensuring the right product is used at the right stage of the paint enhancement or correction.
How to use
Before Machine polishing your vehicle ensure that you have cleaned and decontaminated the paintwork thoroughly to ensure that the surface is completely free of contaminants that could potentially damage the vehicle paintwork or your machine polishing pad. We recommend masking any delicate areas that could be damaged through contact with the machine polisher such as grilles, badges etc.
Once you have masked the vehicle and chosen your pad and compound combination you are ready to polish.
If you are using a new polishing pad we recommend applying a greater quantity of compound to “prime” the pad for use.
Working on a area of approx 15×15 inches, begin polishing at a low speed to spread the compound and gradually work up through the speeds until the desired machine speed is reached.
Once you are at the appropriate machine speed, work the compound until the haze begins to clear, this is the abrasive component of the compound breaking down and starting to polish the surface after cutting, while machine polishing a close eye should be kept on the panel temperature. Once the compound has reached the clear stage it can then be removed with a soft pile buffing towel to reveal the correction status. We recommend the use of IPA (Panel prep) to remove any residual polishing oils and reveal the true level of correction.
Once you are happy with the condition of your paintwork a sealant or wax would need to be applied for protection.
Up to 1kg £3.50
Up to 30kg £4.50
Scottish Highlands & Islands
Up to 1kg £3.50
Up to 30kg £9.00
A shipping quote can be obtained during the checkout process on our website.
Spend and earn points
Shop now, pay later. Learn More