HEAVY CUT KITScratch and swirl removal kit
Hand or machine use
In Stock
HEAVY CUT KIT Description
The perfect kit for removing/reducing swirls and scratches by hand or by machine!
Features
- 500ml Restore heavy cut compound
- Orange hand applicator
- 135mm orange foam polishing pad
- 80mm orange polishing pad
- 5 x Edgeless super soft buffing towels
Description
This kit is perfect for either hand or machine use.
Restore Cutting Compound.
A premium high abrasive machine polishing paste offering the latest technology in heavy cut abrasives. A very sharp and homogeneous paste with diminishing abrasives produces a high cutting action and leaves a excellent even finish ready for refinement. Ideal for cutting badly weathered clearcoat and heavy paint defects, severe swirl marks, deeper scratches and can effectively remove up to 1500 grit sanding marks .
Correct It Hand Applicator pad.
The firm orange hand applicator pad removes scratches, swirl marks, holograms and marring from all modern paint finishes. Ideal for hard German clear coat and deeper marks.
135mm and 80mm Orange machine polishing pads.
- Developed and designed for comfortable easy use
- Open cell structure for optimum performance
- Central hole for ventilation and easy alignment
- Bevelled edge to maximise safety when polishing intricate areas
5 Pack of orange edgeless super soft buffing towels.
- 40x40cm
- 300gsm
- “Split fibre” construction for superior softness
- Edgeless
How to use
Machine Polishing
If you are using a new polishing pad we recommend applying a greater quantity of compound to “prime” the pad for use.
Working on a area of approx 15×15 inches, begin polishing at a low speed to spread the compound and gradually work up through the speeds until the desired machine speed is reached.
Once you are at the appropriate machine speed, work the compound until the haze begins to clear, this is the abrasive component of the compound breaking down and starting to polish the surface after cutting, while machine polishing a close eye should be kept on the panel temperature. Once the compound has reached the clear stage it can then be removed with a soft pile buffing towel to reveal the correction status. We recommend the use of IPA (Panel prep) to remove any residual polishing oils and reveal the true level of correction.
Hand Use:
Apply a few drops of Restore onto your hand applicator and work over the area in small sections until you have achieved your desired results.
2 in stock
Be the first to review “HEAVY CUT KIT”
You must be logged in to post a review.
Reviews
There are no reviews yet.